1.5mmAPF-3000 pressure-sensitive adhesive polymer waterproofing membrane reactive I. Introduction and product pictures 1. Introduction 1,1.5mmAPF-3000 pressure-sensitive adhesive polymer waterproofing membrane reactive and cross-laminated HDPE film ( type of moist substrate stick with polymer modified cement mortar) for the manufacture of self-adhesive waterproof membrane matrix can no embryo moist substrate composition, can-Chemical Co., Ltd. developed the self-adhesive rubber bitumen membrane products and cross-layer Pressure HDPE film (the type of polymer matrix adhesion modified wet cement) --- barley moist substrate application / pre-applied after a self-adhesive membrane. 2, the upper surface of the aluminum or aluminum film-coated polyester film as a reinforcing material and covered with rubber asphalt as the adhesive material. You can (for wet substrate method) or directly in the polymer cement structure constructed by conventional processes (substrate method of coating a curing agent), to meet the different needs of the project construction. 3, because the product can be adhered to the moist substrate polymer cement mortar directly, so no special requirements, the ratio of water to the substrate. The adhesive effect is because a strong film is quite good, waterproof layer to prevent water and building structures. 4, special ingredients and advanced bonding technology enables the adhesive strength can not even roll a rolling lower, if the overlapping portion of the film is some water. 2. Introduction Figure II, 1.5mmAPF-3000 pressure-sensitive adhesive reactive polymer waterproofing membrane system consisting of NB APF-405 (PET) waterproofing membrane with aluminum polyester film NB APF-406 (AL) waterproofing membrane Third, the excellent performance 1. High handle tear strength and watertight in SCRES a fixed position on the screws and fasteners than the average film 2 better adhesion with normal or low aluminum membrane assorted polymer cement, in both the direction of the strong resistance to tearing. 3. good tensile strength and weather 4. dimensionally stable, no creases, reliable protection waterproof 5. 1. The firm friendship between the film and the adhesive properties of the base construction performance. If the diaphragm any damage, leakage of water is limited to a certain area without channeling. Leakage point is the same as a bad point for inspection and repaire. Its unique "self-healing" function to ensure pin holes heal. 6. Good adaptability, construction environment. It can not be used in wet-based primer, solvent or fire, guarantee period, avoiding contamination of the environment are applied. 7. adaptability, cold weather changes from hot areas of the region, good adhesion shaped in part, without the empty drum. ? Four, 1.5mmAPF-3000 pressure-sensitive adhesive polymer waterproofing membrane reactive Scope 1. RAM-CL is recommended that non-exposed roofing membrane, underground works, subways, tunnels and water channels apply. It is designed to use no fire in this structure are allowed to use. 2. The cement mortar is used to install the base on the RAM-CL, and recommend the use of self-adhesive membrane between. ?? Five, product specifications thickness: 1.2 mm; 1.5 mm; 2.0 mm Width: 1.0 m Length: to 20m / roll or custom six production bases buffalo were workers Zhang Publisher